16 years of Sales and Service to the Test Equipment World!

Test Equipment Connection - http://www.testequipmentconnection.com - (800) 615-8378 - (407) 804-1299

Adapters Coaxial Hardware - New and Refurbished


Coaxial Hardware (475)

Showing (1-30) of 89 total products.
1 | 2 | 3 - next

Agilent HP 85650A
The 85650A Quasi-Peak Adapter can be attached to the spectrum analyzer to provide manual and automatic quasi-peak detection capability with the resolution bandwidth recommended by CISPR Publication 16 and 		Refurbished

$3,590.00
Com-Power CLA-150
1000 MHz, Absorbing Clamps for CISPR 14 (EN 55014) Com-Power CLA-150 Features: o Frequency Range 		New

$3,265.00
Com-Power CLA-050
Absorbing Clamps for CISPR 14 (EN 55014) * Com-Power CLA-050 Features: o Frequency Range - 30 		New

$2,425.00
Ailtech CA7
The CA7 CISPAR/ANSI Adapter adapts field strength meters NM-17/27A and NM-37/57A to perform CISPR, ANSI, and VDE measurements. The frequency ranges 10 to 50kHz, 0.15 to 30MHz and 30 		Refurbished

$1,995.00
Agilent HP 3788A
SCSI-to-RS232 mux box 		Refurbished

$1,800.00
Agilent HP 34501B
ARMATURE MUX W/ST 		Refurbished

$1,595.00
Agilent HP 83236A
PCS Adapter 		Refurbished

$1,100.00
Agilent HP 11850C
The Agilent 11850C is a 50 ohm three-way power splitter that is recommended for use with the Agilent 8753 network analyzer. Its connectors are type-N female. The Agilent 11851B 		Refurbished

$695.00
Rohde & Schwarz ZZA-97
19" adapter 2 HU, 1/2 for KB 90 cabinets, for 1 or 2 units 350 mm depth / NRVS, URV35/55 		New

$515.00
Agilent HP 11533A
Coaxial Adapter APC7 to SMA/M 		Refurbished

Request Information
Agilent HP J2929A
Optical power splitter SC connecto 		Refurbished

Request Information
Agilent HP 432C/478A
High efficiency and good radio frequency (RF) match are characteristic of the 478A Coaxial Thermistor Mount. Used in conjunction with the 432 Power Meter it provides high accuracy even 		Refurbished

Request Information
Agilent HP 11900A
2.4 mm male to 2.4 mm male adapter 		Refurbished

Request Information
Agilent HP 11904D
2.4 mm female to K conn. male adapt 		Refurbished

Request Information
Agilent HP 11525A
Coaxial Adapter The Agilent 11525A is a general purpose grade, APC-7 to type-N male adapter. Key Features and Specifications Connector Type: APC-7, Type N (m) Grade: General Purpose Frequency Range: dc - 		Refurbished

Request Information
Agilent HP V281C
1.0 mm (f) to V-band waveguide adap 		Refurbished

Request Information
Agilent HP 432B/8478B
High efficiency and good RF match are characteristic of the 8478B Thermistor Mount. Covers the frequency range from 10MHz to 18GHz. Temperature compensated for low drift, even in the 		Refurbished

Request Information
Agilent HP 11901A
2.4 mm male to APC-3.5 male adapter 		Refurbished

Request Information
Agilent HP 11921A
1.0 mm male to 1.85 mm male adapter 		Refurbished

Request Information
Agilent HP 11667C
Power Splitter 		Refurbished

Request Information
Agilent HP V281D
1.0mm (m) to V-band waveguide adapt 		Refurbished

Request Information
Agilent HP 432A/478A
High efficiency and good radio frequency (RF) match are characteristic of the 478A Coaxial Thermistor Mount. Used in conjunction with the 432 Power Meter it provides high accuracy even 		Refurbished

Request Information
Agilent HP 5346A
TERM ADAPTER 		Refurbished

Request Information
Agilent HP 11904A
2.4 mm male to K connector male ada 		Refurbished

Request Information
Agilent HP 11920B
1.0 mm female to 1.0 female adapter 		Refurbished

Request Information
Agilent HP U281A
WR 19-1.85mm(f) Adapter (40-60 GHz) 		Refurbished

Request Information
Agilent HP E5346A
E5346A 34-ch single-ended Mictor connector probe, connects to 40-pin LA cable 		Refurbished

Request Information
Agilent HP 11904C
2.4 mm male to K conn. female adapt 		Refurbished

Request Information
Agilent HP 11922D
1.0 mm female to 2.4 mm male adapte 		Refurbished

Request Information
Agilent HP U281B
WR 19-1.85mm(m) Adapter (40-60 GHz) 		Refurbished

Request Information

Showing (1-30) of 89 total products.
1 | 2 | 3 - next

Back