Generators (2289)
| Showing (1-30) of 38 total products. 1 | 2 - next
| Anritsu MG445A NOISE GENERATOR, MEASUREMENT OF BER VS SIGNAL/ NOISE RATIO FOR DIGITAL MICROWAVE RADIOS. | Refurbished
$3,500.00 |
| Ailtech 7616 The 7616 Noise Generator is an important tool for measuring the noise performance of amplifiers and receivers, the unit covers the frequency range from 1 to 12.4GHz. This is | Refurbished
$1,795.00 |
| General Radio 1383 Random Noise Generator
The 1383 Random Noise Generator covers the frequency range of 20Hz to 20MHz, ?1.5 dB; 30 ?V to 1 V output, open-circuit; mater and 10 dB | Refurbished
$1,575.00 |
| Marconi TF2092C Noise generator with selectable frequency bands and adjustable output | Refurbished
$1,550.00 |
| Marconi TF2092B/M The TF2091B Noise Generator and the TF2092B Noise Measuring Receiver make up the OA2090B White Noise Test Set. This set can be used to completely noise load a 6 | Refurbished
$1,495.00 |
| Marconi TF2092B The TF2091B Noise Generator and the TF2092B Noise Measuring Receiver make up the OA2090B White Noise Test Set. This set can be used to completely noise load a 6 | Refurbished
$1,495.00 |
| Marconi TF2091C Noise Generator for White Noise Test Set ( use with TF2092B Noise Rcvr. ) Can be used to provide noise to up to 1200 channel of freq. multiplexed, FDM | Refurbished
$1,395.00 |
| General Radio 1390B The 1390B Random-Noise Generator generates a broad band noise signal (5Hz to 5MHz) with a uniform spectrum level, especially useful in noise and vibration testing of mechanical and electrical | Refurbished
$1,350.00 |
| Marconi TF2091B The TF2091B Noise Generator and the TF2092B Noise Receiver (when used together) make up the OA2090 White Noise Test Set (units are sold separately). The OA2090 permits measurement of | Refurbished
$1,295.00 |
| General Radio 1382 The 1382 Random Noise Generator provides white, pink, or ANSI noise spectrum with variable output up to 3 V rms.
Covers 20Hz to 50kHz frequency range
Gaussian distribution and white, pink, | Refurbished
$1,100.00 |
| Ailtech 7617 The 7617 Noise Generator is a quality, solid-state noise source. Provides a calibrated, accurate output (ENR) in the range from 14 to 16.5 dB making it a valuable tool | Refurbished
$995.00 |
| General Radio 1381 The 1381 Random-Noise Generator generates truly random noise from a semiconductor source. The generated noise is flat down to 2Hz and is intended for random-vibration tests and for general-purpose | Refurbished
$975.00 |
| Ailtech 7010 The 7010 Gas-Discharge Noise Source operates in the frequency range of 0.2 to 2.6GHz.
ENR: 15.65 dB ?0.25 dB
Output Connector: Type N Female | Refurbished
$300.00 |
| Microwave Semiconductor MC50018P The MC50018P Wideband Coaxial Noise Source is constructed of a hybrid integrated circuit that yields a mechanical integrity that enables it to withstand the most severe environmental conditions with | Refurbished
Request Information |
| Micronetics ANG BBV Series Baseband Video testing – The ANG BBV Series of Noise Generators are designed for testing baseband (NTSC, PAL, SDTV, HDTV) video and audio systems in the presence of noise. | Refurbished
Request Information |
| Agilent-HP 346B/002 The 346B Broadband Noise Source has the capability of covering the microwave frequency range up to 18GHz as well as the UHF and IF ranges. It is unnecessary for | Refurbished
Request Information |
| Micronetics ANG DTV2 Series Preamplified DTV/HDTV field testing – The ANG DTV2 Series of Noise Generators is a fully integrated, automated test subassembly that takes the output from a mobile or stationary DTV | Refurbished
Request Information |
| Agilent-HP 349A The 349A UHF Noise Source consists of argon gas discharge tubes in Type N coaxial configuation for automatic noice figure readings, 400 to 4000MHz frequency range. Excess Noise Ratio | Refurbished
Request Information |
| Micronetics ANG DTV Terrestrial ATSC DTV signal testing – The ANG DTV Series of Noise Generators are specifically designed for field-testing terrestrial ATSC DTV signals. Offering the most flexible architecture available in | Refurbished
Request Information |
| Micronetics CNG DTV IF Loop-back testing – The CNG DTV Series of Noise Generators are specifically designed for IF loop-back testing, such as that called out by ATSCa80. The CNG DTV provides | Refurbished
Request Information |
| Agilent-HP 346B/2 The 346B Broadband Noise Source has the capability of covering the microwave frequency range up to 18GHz as well as the UHF and IF ranges. It is unnecessary for | Refurbished
Request Information |
| Micronetics NOD Series Our most economic solution for laboratory testing, field applications, or factory use. The NOD Series noise generator instrument is small, lightweight, and portable with manually controlled attenuators on the | Refurbished
Request Information |
| Agilent-HP 346B/1 The 346B Broadband Noise Source has the capability of covering the microwave frequency range up to 18GHz as well as the UHF and IF ranges. It is unnecessary for | Refurbished
Request Information |
| Micronetics ANG Series The ANG Series is the most flexible architecture available for automated noise generators. This rack mountable noise generator can be remote controlled via RS-232 or GPIB interfaces. A long | Refurbished
Request Information |
| Agilent-HP 346B The 346B Broadband Noise Source has the capability of covering the microwave frequency range up to 18GHz as well as the UHF and IF ranges. It is unnecessary for | Refurbished
Request Information |
| Micronetics CNG Series Micronetics' CNG instruments are designed to automatically add noise to a signal to a precise settable Eb/No or C/N for testing bit error rate (BER) and other parameters of | Refurbished
Request Information |
Showing (1-30) of 38 total products. 1 | 2 - next
|