16 years of Sales and Service to the Test Equipment World!

Test Equipment Connection - http://www.testequipmentconnection.com - (800) 615-8378 - (407) 804-1299

Cards - New and Refurbished


Accessories and Upgrades (1112)

Showing (31-60) of 77 total products.
previous - 1 | 2 | 3 - next

Fluke 2280A-342
GP-IB INTERFACE CARD
Refurbished

$595.00

Hioki 9715-51
Hioki 128MW Memory Board (8861 requires 2 Boards)
New

$550.00

Tektronix 92A16
200-MHz ACQUISITION CARD
Refurbished

Request Information

Keithley 7036
Model 7036 Single-Pole Relay Card w/ 40 Independent Switches and a Mass-Terminated 96-Pin Connector (for Models 7001 and 7002) Key Features and Benefits: Mass terminated connection1A switch rating<100pA offset current<4μV contact
Refurbished

Request Information

Tektronix K15MB180
K15 HW Monitoring Interface Board E1/DS1/J1 PCM 4x Rx/Rx and connector for LIF Ethernet (PWL-2); prereq.: software version >= V2.40
Refurbished

Request Information

Keithley 7035
Model 7035 9-Bank, 1x4 Mux Card (for Models 7001 and 7002) Key Features and Benefits: Great fit for low frequency telecom test The Model 7035 9-Bank Multiplexer
Refurbished

Request Information

Tektronix G35SB080
G35 HW Mon/Sim Interface Board E1/DS1/J1 PCM 4x Rx/Tx
Refurbished

Request Information

Keithley 7020
Model 7020 Digital I/O Card w/ 40 Inputs, 40 Outputs and Mass-Terminated 96-Pin Connector (for Models 7001 and 7002) Key Features and Benefits: 80-bit control - 40 in/40 outInput and output
Refurbished

Request Information

Tektronix G35SB000
PCE 4 board
Refurbished

Request Information

Keithley 7019-C
Model 7019-C 6-Wire Ohms Matrix Card w/ Mass-Terminated 96-Pin Connector (for Models 7001 and 7002) Key Features and Benefits: For high speed production test of resistor networksSupports
Refurbished

Request Information

Agilent HP 69770A
The 69770A Isolated Digital Input Card is designed for use in 6954A, 6944A, and 6942A Microprogrammers. It breaks the path of potential ground loops with an optically coupled isolator
Refurbished

Request Information

Keithley 7017
Model 7017 800MHz Mux Card (for Models 7001 and 7002) Key Features and Benefits: DC to 800MHz, 50Ω, signal switching<10mΩ contact resistance
Refurbished

Request Information

Keithley 7174A
Model 7174A 8x12, Low-Current, High-Speed Matrix Card (for Models 707A and 708A) Key Features and Benefits: Fast time to measurementLow leakage (<100fA offset on all signal paths)2-pole
Refurbished

Request Information

Agilent HP 69771A
The 69771A Digital Input/Analog Comparator Card monitors up to sixteen contact closures, switches, TTL signals, CMOS signals, or analog signals. The switching threshold can be set to any value
Refurbished

Request Information

Keithley 7015-S
Model 7015-S Quad 1x10 Solid-State Mux Card w/ Detachable Screw Terminal Connector (for Models 7001 and 7002) Key Features and Benefits: Quad 1x10 (40-channel) solid-state multiplexer30,000 hours
Refurbished

Request Information

Keithley 7173-50
Model 7173-50 High-Frequency, 2-Pole, 4x12 Matrix Card (for Models 707A and 708A) Key Features and Benefits: 200MHz bandwidth<2ns rise time50Ω impedance<15μV offset<200pA offset current2-pole switching The Model 7173-50 combines high frequency performance with
Refurbished

Request Information

Agilent HP 98257A
CARD MEMORY
Refurbished

Request Information

Agilent HP 69770A
The 69751B A/D Converter Card is a plug-in card for use with the 6942A, 6944A, or 6954A Multiprogrammers.
Refurbished

Request Information

Keithley 7015-C
Model 7015-C Quad 1x10 Solid-State Mux Card w/ Mass-Terminated 96-Pin Connector (for Models 7001 and 7002) Key Features and Benefits: Quad 1x10 (40-channel) solid-state multiplexer30,000 hours MTBFScan/measure
Refurbished

Request Information

Keithley 7169A
Model 7169A 20-Ch Form C Switch Card (for Model 7002) Key Features and Benefits: 20 independent Form C relays500V peakMass termination connectors Each channel of the Model 7169A is a single-pole, double-throw
Refurbished

Request Information

Agilent HP 69731B
The 69731B Digital Output Card is a plug-in card for use with the 6942A, 6944A, or 6954A Multiprogrammers.
Refurbished

Request Information

Agilent HP 69770A
The 69770A Isolated Digital Input Card is designed for use in 6954A, 6944A, and 6942A Microprogrammers. It breaks the path of potential ground loops with an optically coupled isolator
Refurbished

Request Information

Keithley 7012-S
Model 7012-S 4x10 Matrix Card w/ Screw Terminals (for Models 7001 and 7002) Key Features and Benefits: 4x10 2-pole matrixAvailable with screw terminal or mass terminated
Refurbished

Request Information

Keithley 7166
Model 7166 Relay Card w/ 10 Mercury Wetted Reed Relays (for Models 7001 and 7002) Key Features and Benefits: Mercury-wetted relays2-pole Form AQuick disconnect screw terminal connections The
Refurbished

Request Information

Agilent HP 69731B
The 69731B Digital Output Card is a plug-in card for use with the 6942A, 6944A, or 6954A Multiprogrammers.
Refurbished

Request Information

Agilent HP 69751A
The 69751B A/D Converter Card is a plug-in card for use with the 6942A, 6944A, or 6954A Multiprogrammers.
Refurbished

Request Information

Keithley 7014
Model 7014 39-Ch t/c Mux Card w/ Built-In Temperature Reference for CJC (for Models 7001 and 7002) Key Features and Benefits: Built-in temperature reference for thermocouple cold
Refurbished

Request Information

Keithley 7164D
Model 7164-D 20-Ch Scanner Card w/ Dry Reed Relays (for Models 7001 and 7002) Key Features and Benefits: Low cost general purpose scanningEasy cabling with mass
Refurbished

Request Information

Agilent HP 64261A
8048 Family Emulation Control Card
Refurbished

Request Information

Keithley 7012-C
Model 7012-C 4x10 Matrix Card w/ Mass-Terminated Connector (for Models 7001 and 7002) Key Features and Benefits: 4x10 2-pole matrixAvailable with screw terminal or mass terminated connectionsRows
Refurbished

Request Information

Showing (31-60) of 77 total products.
previous - 1 | 2 | 3 - next

Back