Agilent-HP Converters
Power Supplies (364)
Meters (298)
Sensors (51)
Testers (45)
Other Types of Equipment (4562)
Probes (205)
Coaxial Hardware (303)
Oscilloscopes (178)
Plug-ins (289)
Calibrators (35)
Generators (1001)
Analyzers (1962)
Amplifiers (67)
Recorders, Plotters (58)
Filters (4)
Counters (241)
Bridges (33)
Dividers (1)
Synthesizers (33)
Mixers (7)
Sections (16)
Accessories and Upgrades (599)
Standards (14)
Mobile Phone Testers (29)
|
Showing (1-30) of 34 total products.
1 | 2 - next
|
Agilent-HP 8511B
The HP Agilent 8511B 45 MHz to 50 GHz frequency converter, combined with the HP Agilent 8510C Network Analyzer results in a general purpose four-channel magnitude/phase receiver. Add power |
Refurbished
$18,995.00 |
|
Agilent-HP 70427A
Microwave downconverter module. The Agilent 70427A microwave downconverter module translates microwave signals to RF frequencies for use with the 3048A phase noise measurement system. The 70427A provides state-of-the-art noise |
Refurbished
$14,500.00 |
|
Agilent-HP 11793A
The 11793A Microwave Converter downconverts microwave signals to the frequency range of the 8902A measuring receiver. For signals above 1.3GHz, the unit routes the signal through its internal mixer. |
Refurbished
$8,995.00 |
|
Agilent-HP 8511A/1
The 8511A Frequency Converter provides good microwave performance at an economical price. The unit operates from 45Hz to 26.5GHz and has three test channels |
Refurbished
$8,000.00 |
|
Agilent-HP 8511A
The 8511A Frequency Converter provides good microwave performance at an economical price. The unit operates from 45Hz to 26.5GHz and has three test channels |
Refurbished
$7,500.00 |
|
Agilent-HP 44727AT
The 44727AT Digital-to-Analog Converter provides 4 channels. Each channel can be configured using finger-movable jumpers to output either unipolar or bipolar voltage, or unipolar current. Channels are isolated and |
Refurbished
$995.00 |
|
Agilent-HP 59500A
The 59500A HP-IB Interface Unit converts serial ASCII alphanumerics of the HP-IB to the 16-bit parallel format required by the 6940B/6941B Multiprogrammer. |
Refurbished
Request Information |
|
Agilent-HP 2590B
The 2590B Frequency Converter performs the functions of a transfer oscillator and a transfer oscillator synchronizer. The unit covers the frequency range of 500MHz to 15GHz. The unit provides |
Refurbished
Request Information |
|
|
Agilent-HP 5255A
The 5255A Frequency Converter extends the range of the 5254L and 5256L counters from 3 to 12.4GHz and can also be used as a direct counting prescaler from 1 |
Refurbished
Request Information |
|
|
Agilent-HP 5356B
The 5356B Frequency Converter provides pulse and CW frequency measurement capabilities to 26.5GHz.
-25 dBm sensitivity
100 Hz measurement resolution
75 nsec minimum pulse width
20 nsec minimum external gate
CHIRP profile or VCO |
Refurbished
Request Information |
|
Agilent-HP 59301A
The 59301A ASCII-To-Parallel Converter is a very useful instrument, it allows units which are controlled via BCD input to be operated using the HP-IB. It does this by accepting |
Refurbished
Request Information |
|
|
Agilent-HP 59403A
The 59403A HP-IB/Common Carrier Interface provides a way to extend the separation of component parts in an HP-IB system by more than the 20 meter maximum transmission path length |
Refurbished
Request Information |
|
|
Agilent-HP 8411A/18
The 8411A Frequency Converter converts RF signals to IF signals for processing in the 8410C Network Analyzer Mainframe. It operates in the frequency range of 0.11 to 12.4GHz with |
Refurbished
Request Information |
|
Agilent-HP 5356A/006
The 5356A Frequency Converter provides pulse and CW frequency measurement capabilities to 18GHz.
-25 dBm sensitivity
100 Hz measurement resolution
75 nsec minimum pulse width
20 nsec minimum external gate
CHIRP profile or VCO |
Refurbished
Request Information |
|
Agilent-HP 5356C/1
The 5356C Frequency Converter provides pulse and CW frequency measurement capabilities to 40GHz.
-25 dBm sensitivity
100Hz measurement resolution
75 nsec minimum pulse width
20 nsec minimum external gate
CHIRP profile or VCO post-tuning |
Refurbished
Request Information |
|
Agilent-HP 59313A
The 59313A Analog-To-Digital Converter is a four channel converter that allows analog data with a full scale range of up to ? 10 V DC to digitized and transmitted |
Refurbished
Request Information |
|
|
Agilent-HP 8411A
The 8411A Frequency Converter converts RF signals to IF signals for processing in the 8410C Network Analyzer Mainframe. It operates in the frequency range of 0.11 to 12.4GHz with |
Refurbished
Request Information |
|
|
Agilent-HP 59501A
Isolated digital-to-analog converter, provides a convenient interface between the HP-IB and HP power supplies. With the 59501A Power Supply Programmer, a wide range of DC voltages and currents becomes |
Refurbished
Request Information |
Showing (1-30) of 34 total products.
1 | 2 - next
|
|
![TEC [home link]](includes/templates/tecstore/images/logo.jpg "TEC [home link]"){kind=logo}
USA & Canada: (800) 615-8378
Mexico 52-55-8421-4127
Chile: 2-897-4335
Brazil: 301-32793
United Kingdom: 20-8144-7837
Sweden: 46-46-288-61-42
Denmark: 369-92915
Finland: 358-9-2316-3837
Estonia: 712-3440 
China: 86-755-8355-2154
Hong Kong: 852-2690-1360
Australia: 61-2-8011-3687