New, refurbished, used, and secondhand Instek products are available for sale, rent, trade-in, and lease from Test Equipment Connection. The variety of Instek power supplies, meters, testers, probes, oscilloscopes, generators, analyzers, counters, antennas, tester sets, service monitors, test fixtures and more come with varying performance levels and a wide range of features to meet any of your T&M needs.

<-- For more products by Instek please use the navigation to the left of the screen.

Featured Instek Test Equipment

Showing (211-240) of 334 total products.
previous - 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 - next

Instek GTL-101 Instek GTL-101 a BNC for alligator cable for the GFC-8010H/8131H/8270H, GFG Series, GOS-310/620FG, GVT-427B/417B, SFG-1003/1013, SFG-2000 Series, SFG-2100 Series. See

New Request Information

Instek GLP-1A LOGIC PROBE & PULSER

New Request Information

Instek GFG-8016G Function Generator 2MHz * Frequency Range: 0.2Hz ~ 2MHz * Three Instruments

New Request Information

Instek GOS-310 10MHz 1-Channel Oscilloscope

New Request Information

Instek GPC-6030 DC Power Supply 60V/3A

New Request Information

Instek GOS-658G 50MHz 2-Channel Oscilloscope

New Request Information

Instek GRS-6032 30 MHz Digital Storage Oscilloscoe

New Request Information

Instek GPR-1810H DC Power Supply 18V/10A

New Request Information

Instek GTL-203 Instek GTL-203 (3A) is the accessory for the SPS series. See Spec Sheet for Additional Information

New Request Information

Instek GCP-210L for 20-50 MHz oscilloscope

New Request Information

Instek GDM-356 3 1/2 digits

New Request Information

Instek GDM-350A 3 1/2 digits

New Request Information

Instek GTL-401 Instek GTL-401 a DC Power Cord with DC Jack and Lighter Plug, Current 5A, for the GSP-827/830. See Spec Sheet

New Request Information

Instek GSC-001 Instek GSC-001 A soft carrying case for the GSP-827 / GSP-830 Spectrum Analyzer It features a shoulder strap and

New Request Information

Instek GRA-403 Rack Mount for PSH

New Request Information

Instek GRA-402 Rack Mount for LCR/GPT/GPI

New Request Information

Instek GTL-232 Instek GTL-232 a RS-232 cable for the GDM-8255, GDS-800 Series, GDS-2000 Series, GFG-3015, GOM-802, GRS-6032A/6052A, GPI/GPT-700A Series, GPM-8212, LCR-8101,

New Request Information

Instek GTL-301 Instek GTL-301 a RF cable assembly, RG223, N(m) to N(m), 1000 mm for the GSP-810/827/830. See Spec Sheet for Additional Information

New Request Information

Instek GTP-250A for GDS-840 series

New Request Information

Instek GTP-150A for GDS-820 series

New Request Information

Instek GTP-100A Instek GTP-100A a dc to 100 MHz, 10:1; 1:1 dc to 6 MHz oscilloscope probe for the GDS-810C/810S/1102/2102/2104, GOS-6103/6103C/6112. See Spec

New Request Information

Instek GTP-060A The Instek GTP 060A is one of the Factory New Probes for the GDS-806S/GDS-806C Series. See Spec Sheet for Additional

New Request Information

Instek GLF-250 for 200 MHz oscilloscope

New Request Information

Instek GLF-190C for GRS-6000 series

New Request Information

Instek GVT-417B Milli-Volt Meter 1Ch

New Request Information

Instek GPC-3030DQ DC Power Supply 30V/3A

New Request Information

Instek GFG-813 Function Generator 13MHz

New Request Information

Instek GPS-3030DD DC Power Supply 30V/3A

New Request Information

Instek GRA-401 Rack Mount

New Request Information

Instek GFG-8210 Function Generator 10MHz

New Request Information

Showing (211-240) of 334 total products.
previous - 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 - next

Channel Partner and Authorized Distributor of Instek Test and Measurement Equipment

For over 30 years in the test and measurement industry, GW Instek has been creating highly accurate test equipment. Started in 1975, GW Instek designs, manufactures and markets data acquisition and control instruments for both device and production/assembly testing. Their portfolio includes over 150 products across five key lines ­ oscilloscopes, spectrum analyzers, function generators, power supplies, component and safety testers. Industries we service include automotive, medical, pharmaceutical, semiconductor, telecommunications, computers and peripherals, consumer electronics, optoelectronics, factory automation, research and education. Each GW Instek product must pass 40 in-house quality and performance verification tests before it leaves their facilities. This thorough process starts with environmental, safety and durability testing in the product design phase, through to burn-in and shipping tests ahead of final inspection and packing. All three GW Instek manufacturing facilities in Taiwan and China all adhere to ISO quality and environmental management standards, as well as European CE safety regulations.