This Product is Refurbished

Our Price:

$795.00

Accredited Calibration and Repairs Available

HP 209A OSCILLATOR

The 209A Oscillator is a small, lightweight, sine/square oscillator. Stable, accurate signals which can be synchronized with an external source are instantly available over a frequency range from 4Hz to 2MHz. Separate adjustable sine/square outputs are located on the front-panel. Distortion and flatness can be minimized at low frequencies by a rear-panel Low Distortion Mode switch. Sine wave output of 5 V (600-ohms); square wave output of 20 V (p-p) into 600-ohmsRANGES:

Frequency:

 4hz to 2MHz in 6 ranges

performance:

dial accuracy +/-3% or frequency setting.

flatness:

at max output into 600 ohm load:

 +/- 0.5% from 100hz to 300 KHz

 +/- 1% from 200kHz to 1MHz

 +/- 5% from 1MHz to 2MHz

below 100hz, +/- 1% in LF low distortion mode, +5/-1% in normal mode.

distortion is 0.1% from 200hz to 200kHz, degrading to 1% at the ends of the

frequency range. In LF low distortion mode, the degradation is only 0.2%

at the low end.

hum and noise: less than 0.01% of output.

output characteristics:

sine wave: 

 output voltage: 5V rms into 600 ohms, 10V open circuit. output can be

 floated up to +/- 500V peak between output and chassis ground.

 output impedance: 600 ohms

 output control: 20 dB range, continuously adjustable.

 output balance: greater than 40db below 20 kHz

square wave:

 output voltage: 20V pk-pk open circuit, symmetrical about zero. Output

 can be floated +/- 500V from chassis ground.

 rise and fall time: less than 50ns

 symmetry: +/- 5%

 output impedance: 600-900 ohms depending on setting of output control

external synchronization:

 sync impedance: 10 kohm

 sync output: sine wave in phase with output. amplitude into 1megohm

 shunted by 100pf is greater than 1.7V rms from 4hz to 50KHz, greater

 than 0.1V above 50KHz

 sync input: oscillator can be synchronized to external signal. for 5V

 rms input, sync frequency can be as much as +/- 7% away from set

 frequency. sync range is a linear function of sync voltage.

general:

 operating temperature: 0C to 55C

 storage temp: -40C to 75C

 pwer AC line 115V or 230V +/- 10%, 50 hz to 400Hz, less than 7W.

weight:

 net 6 lbs, shipping 8lbs.

Calibration available for an additional charge. We buy surplus test equipment. Whether you are looking to liquidate unused assets or resell equipment, we buy all types of test equipment at the best price.

• Model: 209A
• Manufactured by: Agilent HP