Test Equipment Connection - http://www.testequipmentconnection.com - (800) 615-8378 - (407) 804-1299

Spectrum Analyzers : Rohde & Schwarz FSL6

This Product is New

Our Price:

$18,585.00

* USD Price valid in USA Only
Request a Quote for Rohde & Schwarz FSL6

Celebrating 16 years of Service to Test Equipment Users Worldwide

PART NUMBER: 1300.2502.16

Similar Products

Rohde & Schwarz FSL6-R3
Rohde & Schwarz FSL6-R3
ROHDE SCHWARZ FSL6.06
ROHDE SCHWARZ FSL6.06
Rohde & Schwarz FSL6-C5
Rohde & Schwarz FSL6-C5
Rohde & Schwarz FSL6 Spectrum analyzer 9 kHz - 6 GHz -135 - +20
Rohde & Schwarz FSL6 Spectrum analyzer 9 kHz - 6 GHz -135 - +20

Rohde & Schwarz, Inc. FSL616 Spectrum analyzer 9 kHz - 6 GHz -135 - +20 dBm, RBW 300 Hz - 10 MHz incl. tracking gen. 1 MHz - 6 GHz (P/N 1300.2502.16) The Rohde & Schwarz, Inc. FSL616 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSL616. The CRT displays received signal strength (y-axis) against frequency ( x-axis). Some applications for Rohde & Schwarz, Inc. FSL616 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz, Inc. FSL616 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz, Inc. FSL616 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

 
ModelSKUDescription
DCV-10240.2187.10Documentation of calibration values
FSL6-DKD1161.2675.02FSL6 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device)
FSL-B101300.6208.02GPIB interface
FSL-B221300.5953.02RF preamplifier gain 20 dB
FSL-B301300.6308.02DC power supply 12 - 28 V
FSL-B311300.6408.02NiMH battery pack
FSL-B41300.6008.02OCXO reference frequency
FSL-B51300.6108.02Additional interfaces video/IF-output, power meter 28 V - DC for noise source
FSL-B61300.5901.02TV trigger for FSL and for ZVL with ZVL-
FSL-B71300.5601.02Narrow resolution filters 10 Hz - 300 Hz
FSL-B81300.5701.02Gated sweep function for FSL and for ZVL with ZVL-K1
FSL-K141302.0913.02Spectrogram measurement, application firmware for FSL and for ZVL with ZVL-K1
FSL-K201301.9675.02Application firmware for cable TV and TV measurements for R&S FSL
FSL-K301301.9817.02Application firmware for noise figure and gain measurements for FSL and for ZVL with ZVL-K1
FSL-K71301.9246.02Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1
FSL-K721302.0620.023GPP Code Domain Power measurements for base station for FSL and for ZVL with ZVL-K1
FSL-K81301.9398.02Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) for FSL and for ZVL with ZVL-K1
FSL-K91301.9530.02Power sensor measurements with NRP
FSL-K911302.0094.02Application firmware for WLAN 802.11A,B,G measurements for FSL and for ZVL with ZVL-K1
FSL-K91N1308.7903.02Upgrade of FSL-K91 to 802.11n
FSL-K921302.0236.02Application firmware for WiMAX 802.16, OFDM measurements
FSL-K92U1302.0307.02Upgrade from FSL-K92 to FSL-K93
FSL-K931302.0736.02Application Firmware for WIMAX 802.16 OFDM/OFDMA Measurements for FSL and for ZVL with ZVL-K1
FSL-Z31300.5401.00Soft carrying bag
FSL-Z41300.5430.02Additional charger unit for FSL-B31. Allows charging the battery without FSL
EVS-Z65201.7760.00Accessory: Protective hard cover (for EVS300, FSL, ZVL)
ZZA-S3341109.4487.00Adapter for BW2000 3HU 3/4 cabinet with impact protection
FSL6-C31300.2502.16.C3Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibrations
FSL6-C51300.2502.16.C5Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibrations.
FSL6-R31300.2502.16.R3Three years of depot repair coverage, including recalibration and test data if necessary to complete a repair – 1st year of repair coverage is provided by the 12-month new product warranty
FSL6-R51300.2502.16.R5Five years of depot repair coverage, including recalibration and test data if necessary to complete a repair – 1st year of repair coverage is provided by the 12-month new product warranty
FSL-B81300.5710.02Gated Sweep 2)
FSL-K9011302.0507.02First prolongation of option FSL-K0 enabling of all firmware options by further 1000 operating hours

Please contact us for more information about the ROHDE SCHWARZ FSL6 Spectrum analyzer 9 kHz - 6 GHz -135 - +20 dB. Choose from over 30,000 products. Our sales representatives will be happy to provide you with the most up-to-date information about the ROHDE SCHWARZ FSL6 Spectrum analyzer 9 kHz - 6 GHz -135 - +20 dB , as well as helping you find the product solution that fits your needs.

  • Model: FSL6
  • Manufactured by: Rohde & Schwarz
  • Base Frequency: 900 KHz
  • Max Frequency: 6 GHz

Fill out the form below for more information about ROHDE SCHWARZ FSL6 Spectrum analyzer 9 kHz - 6 GHz -135 - +20 dB.

* Required information

Your Details:
 *
 *
 *


 *
 *