Network Analyzers : Rohde & Schwarz ZVL-75

This Product is Refurbished

Call 1-800-615-8378 or 407-804-1299 for more information

Save Money and Stretch Your Budget - Buy Refurbished Test Equipment

Similar Products

Rohde & Schwarz CRTPK75

Rohde & Schwarz ZVL3-75 Vector Network Analyzer, 2 ports, 9 kHz

Rohde & Schwarz builds upon the success and acceptance of ZVL3/6, and introduces a key feature improvement and a new member to this product family. The new R&S® ZVL3-75 is a 75 Ω version of ZVL that covers the frequency range for TV, CATV and SAT-TV applications. Similar to ZVL3/6, the new ZVL3-75 is a fully bidirectional 2-port Network Analyzer that provides measurements both in the forward and reverse directions to measure magnitude and phase of all 4 S-parameters. As with ZVL3/6, the new ZVL3-75 can be retrofitted with the ZVL-K1 option to activate Spectrum Analyzer. Now the entire product family is as cost-sensitive, versatile and future-proof line of instruments in the Network Analysis product line. The feature-set of all three (3) ZVL instruments cover middle and lower-end applications for both spectrum analysis and network analysis. Finally, the new ZVL-K3 option adds Time Domain Analysis capability to all three members of this product family.

Key Applications

• Design Labs & Manufacture of RF filter, couplers, relay, amplifiers, cable, antennas, etc.
• Mobile Phone Base Station commissioning, service and installation
• Radio & TV Station commissioning, service and installation
• Remote location RF service application
• Educational Institutions and Research RF-Labs
• Military and Government Applications

Key Characteristics

• Wider Frequency Range
• 9 kHz to 3 GHz – ZVL3/3-75
• 9 kHz to 6 GHz – ZVL6
• Fully bidirectional
• Measurement time (60 ms)
• Measurement Bandwidth (10 Hz to 500 kHz)
• Resolution (1 Hz)
• Dynamic Range (10 Hz) - >115 dB (123 dB typical)
• Output Power (-50 dBm to 0 dBm)
• Spectrum Analysis option (ZVL-K1)
• Time Domain Analysis option (ZVL-K3)
• Measurement Bandwidth (10 Hz to 500 kHz)
• Number of Traces, Channels, Diagram (>100)
• Trace Noise Magnitude (<0.005 dB (rms))
• Integrated step attenuator for measurements on devices with up to 27 dBm output power
• Number of Test Points (4001)
• Effective System Data
• Directivity (>46 dB to 3 GHz / >40 dB 6 GHz – typically 50 dB for both 3 and 6 GHz)
• Source Match (>40 dB to 3 GHz – typically 46 dB / >36 dB to 6 GHz – typically 40 dB)
• Load Match (>46 dB to 3 GHz – typically 50 dB / >40 dB to 6 GHz – typically 46 dB)
• Reflection Tracking (<0.04 dB to 3 GHz / 0.1 dB to 6 GHz – typically 0.01 dB for both 3/6 GHz)
• Trans. Tracking (<0.06 dB to 3 GHz – typically 0.01 dB / <0.2 dB to 6 GHz – typically 0.05 dB)
• Display (6.5” VGA – 640 x 480)
• Portability with DC and battery operation (15.4 lbs and 14.57” deep)
• Best Price/Performance Ratio
• Lower Cost of Ownership

Key Features

• Ease of use
• Bidirectional Test-set
• Color Display and sunlight mode for enhanced visibility
• Instrument setup with pass/fail criteria from hard disk or USB memory device

New Features

• ZVL3-75
• 75 Ω Test environment for TV/CATV/SAT-TV applications
• On-site plug and play installation of hardware options
• Easy to replace damaged N-connector with recalibration
• ZVL-K3 – Time Domain Analysis
• Display discontinuities, reflection factor or impedance versus delay/length

Improve your cash flow by requesting a lease quote on a Rohde & Schwarz ZVL-75 Network Analyzer. We buy surplus test equipment. If you are interested in the residual market value for this product, please contact us to sell your equipment.

• Model: ZVL-75
• Manufactured by: Rohde & Schwarz