Refurbished Agilent 4274A-002
Request Information
Refurbished
| The 4274A Multi-Frequency LCR Meter is a microprocessor based impedance measuring instrument making the evaluation of LCR components, complex components, and semiconductor materials quick-and-easy. A wide range of components can be tested with the 4274A due to its wide frequency range of 100Hz to 100kHz and test signal levels of 1 mV to 5 VRMS. The meter measures equivalent series resistance (ESR), impedance (|Z|), phase angle (Theta), reactance (X), susceptance (B), and conductance (G), in addition to the conventional L, C, R, D and Q parameters. The 4274A measures only the value of the component and/or device under test, with 5 1/2-digit resolution and 0.1% basic accuracy by reducing the possibility of errors due to self or mutual inductance, stray capacitance and/or residual inductance in the test leads or test fixture used. This measurement is obtained by a four terminal pair configuration and a built in automatic zero offset to compensate for these errors. A self test provides an automatic operational verification check indicating a pass or fail condition. Manufacturer's Standard Accessories Direct Coupled Test Fixture Recommended Accessories Manufacturer's Options Option 001 = Internal DC Bias Supply, 0-?35V, 1 mV steps Option 002 = Internal DC Bias Supply, 0-?99.9V, 100 mV steps Option 003 = Battery Backup for Memory Circuits Option 004 = Frequency Steps in 1-3-5 Sequence Option 101 = HP-IB Data Output and Remote Control Option 102 = HP-IB with Isolation Option H01 = High Speed Version (3 digit display); 1-2-4 steps Option H02 = High Speed Version (3 digit display); 1-3-5 steps |
Agilent 4274A-002 datasheet & specifications
