Request Information
New
The Electronics & Innovation 3200L produces 200 Watts of class A linear power output over the entire frequency range from 250 KHz to 120 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 53 dB with a typical gain flatness of +/- 1.5 dB The 3200L is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources. It accurately reproduces all waveforms within its power and frequency ranges: AM. FM, SSB, pulsed and other complex modulation schemes. RuggednessThe 3200L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures. Class of OperationClass A Frequency Range250 KHz to 120 MHz Rated Power Output200 Watts (P1dB) Saturated Power Output250 KHz to 150 MHz; 225 W Gain53 dB (nominal) Gain Flatness+/- 1.5 dB Input Power for rated Pout1 mW Input Impedance / VSWR50Ω / 1.5:1 maximum Output Impedance / VSWR50Ω / 1.25:1 maximum Harmonic Level@150 W; -24dBc Ruggednessoo:1 VSWR StabilityUnconditional into any passive linear ProtectionInput: Unit will withstand input signal of Front Panel MeterFront panel display indicated forward and reflected power Third Order Intercept PointIP3 ~ 59 dBm AC Input104 - 240 Volts Temperature Range0 - 40 C CoolingForced air Weight50 lbs (22.7 Kg) Dimensions8.75 x 16.5 x 18.1 (H x W x D) |
ENI-E&I 3200L Broadband Power Amplifier datasheet & specifications